PROPORTIONAL PRESSURE REDUCING VALVE 24VDC Part no. D-IPDAR43CIJ2L2500

Proportional Pressure Control - D-IPDAR43C illustration

Product may vary from image.

Size (BSP)
Max. flow (lpm)
3.8 lpm
Max. pressure (bar)
50
Symbol
Proportional pressure control symbol

£75.03 exc. VAT

✔ In stock

Inline Valves in stock for next day delivery at Hydrastore

We offer a substantial selection of hydraulic components on our website but if you are still unable to locate the parts you require, please contact our sales team and let us help you find what you are looking for.

View other product configurations

Data sheets

Product Info

Up to 3.8 lpm

Direct Acting Proportional, Pressure Reducing/Relieving valve, Slip-in Type.

Operation

The D-IPDAR43C generates a variable pressure in response to a PWM (Pulse Width Modulated) current signal. With no current applied to the proportional solenoid, the inlet port 2 is blocked and the regulated port 3 is vented to port 1. As current is increased, fluid pressure is proportionally controlled at the regulated port 3. On attainment of proportionally determined pressure at 3, the cartridge shifts to block flow at 2, thereby regulating pressure at 3. In this mode, the valve also will relieve 3 to 1 at a variable value over the set reducing pressure.

This works with an external driver.

Notes

  • Inlet pressure 350 bar available on request.
  • Valve is not supplied with a body, but bodies are available on request.
  • PWM driver is available on request.

Valve Specifications

Flow Range (lpm) 3.8 lpm @ 8 bar Delta P
Controlled Pressure range (bar) 0-25 bar / 0-30 bar (see graph)
Reduced Pressure Tolerance +/- 5%
Max. Back-pressure at T port 20 bar
Internal Leakage 15ml/min. @ 35 bar inlet
35ml/min. @ 350 bar inlet
Hydraulic Oil General purpose hydraulic fluid
Viscosity Range 3 to 640 cSt
Filtration ISO 18/15/13
Operating Temp. -25 to 90?C
Flange Mounting Screws M4x10 / torque 4Nm
Cavity T043 (see cavity data page CAV-T043)
Weight - Valve only 0.25 kg

Coil Specifications

Current Supply PWM (Pulse Width Modulation)
Rated Current Range 200 - 1500 mA (12 Volts)
100 - 750 mA (24 Volts)
PWM or Super-imposed Dither Frequency 100 - 200 Hz
Coil Resistance (12 vdc) 5.4 Ohm +/- 5% at 20°C
Coil Resistance (24 vdc) 22 Ohm +/- 5% at 20°C
Max.Power Consumption 12 Watt (20°C)
Protection Degree IP67 according to IEC 529
Coil Termination Deutsch-Integral DT04-2P
Amp Junior Timer 84-9419

Other Products

Part no.SymbolDescriptionSize (BSP)Max. flow (lpm)Max. pressure (bar)PriceQty
D-IPDAR43CIJ1L2500D-IPDAR43CIJ1L2500 symbolPROPORTIONAL PRESSURE REDUCING VALVE 12VDC3.8 lpm50£66.37
D-IPDAR43CIJ2L2500D-IPDAR43CIJ2L2500 symbolPROPORTIONAL PRESSURE REDUCING VALVE 24VDC3.8 lpm50£75.03 

Please note that prices displayed are exclusive of carriage and VAT. These will be calculated and added at checkout.

Shipping Calculator

Please let us know your post code so we can calculate the most cost-effective shipping method available.

Please note that this applies to UK shipping only

Delivery Info

Our standard delivery service for online orders dispatched to a UK address is DPD Next Day Delivery.

Applies to orders ready for dispatch by 3.00pm Monday to Friday. Orders are not shipped on weekends or bank holidays. Next day delivery may not be available for certain addresses in the following areas: Northern Ireland, Scotland, Isle of Man, Jersey or Guernsey.

If we are experiencing a high volume of orders, shipments may be delayed. If your shipment experiences a significant delay, we will contact you via email or phone.

Carrier information

Delivery is charged at cost and is calculated at the checkout unless your order exceeds the weight allowance for our standard service and /or is shipping to Northern Ireland and addresses outside the UK. In these circumstances your order request will be sent to Hydrastore as an enquiry and a member of our team will contact you with a shipment price and to take payment.

Shipment confirmation

You will receive a confirmation email once your order has shipped.

Get in touch to discuss your requirements

01427 874445
sales@hydrastore.co.uk